October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Relay, Power Control: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- Using two nuts, install the Power Control Relay (2) to the PCR bracket (1) and tighten them to the proper specifications. Refer to TORQUE SPECIFICATIONS
.
 Courtesy of CHRYSLER GROUP, LLC
|
- Connect and secure the eyelet terminals (1) to the PCR and tighten the nuts (3) to the proper specifications. Refer to TORQUE SPECIFICATIONS
.
- Connect the wire harness connector (2) to the PCR.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the PCR cover (1) to the PCR.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.