October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Relay, Power Control: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove the Power Control Relay (PCR) cover (1).
 Courtesy of CHRYSLER GROUP, LLC
|
- Disconnect the wire harness connector (2) from the PCR.
- Remove two nuts (3) and remove the eyelet terminals (1) from the PCR.
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove the two nuts that secure PCR (2) to the PCR bracket (1) and remove from the vehicle.