Cooling System: Engine: Thermostat: Removal: 3.6L
- Disconnect and isolate the negative battery cable.
- Remove the air cleaner body. Refer to REMOVAL .
- Drain the cooling system. Refer to DRAINING
.
- Remove the upper radiator hose (1) from the thermostat housing.
- Disconnect the Engine Coolant Temperature (ECT) sensor (1) harness connector.
- Remove the coolant hose (1) from the thermostat housing.
- Remove the bolts (1) and the thermostat housing.
- Remove and DISCARD the thermostat housing gasket (1).