Sensor, Manifold Absolute Pressure (Map): Installation: 3.2L

Courtesy of CHRYSLER GROUP, LLC

1. The manifold air pressure (MAP) sensor O-ring (1) can be reused if not damaged.
2. Apply a small amount of engine oil to the sensor O-ring (1).

   Courtesy of CHRYSLER GROUP, LLC

3. Install the MAP sensor (1) into the upper intake manifold and rotate 1/4 turn clockwise.

   Courtesy of CHRYSLER GROUP, LLC

4. Connect and lock the electrical connector (1) to the sensor.
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.