October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal And Installation: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the shifter bezel. Refer to BEZEL, SHIFTER, REMOVAL AND INSTALLATION
.
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove the wireless charging pad mat (1).
 Courtesy of CHRYSLER GROUP, LLC
|
- Release the retaining tabs (2) and lift up on the rear of the wireless charging module bracket (1).
- Slide the bracket (1) toward the rear of the vehicle to release it from the front of the floor console.
- Disconnect the wire harness connector (3) from the wireless charging pad module.
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove the fasteners (1) from the wireless charging module (2) and remove it from the wireless charging module bracket (3).