LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Latitude, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Integrated Center Stack (ICSM) >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

GC0202771Courtesy of CHRYSLER GROUP, LLC
  1. Position the ICS (1) to the instrument panel.
  2. Connect the wire harness connector to the ICS (1).
  3. Install the ICS (1) into the instrument panel, pressing firmly to verify the retaining clips are fully seated into the instrument panel.
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals