Section 17 (Exhaust System): Adjustments
WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
A misaligned exhaust system is usually indicated by a vibration, rattling noise, or binding of exhaust system components. These noises are sometimes hard to distinguish from other chassis noises. Inspect exhaust system for broken or loose clamps, heat shields, isolators, and brackets. Replace or tighten as necessary. It is important that exhaust system clearances and alignment be maintained.
Perform the following procedures to align the exhaust system:
- Loosen the clamps and support brackets.
- Align the exhaust system starting at the front and working rearward.
- Tighten all the clamps and brackets once the alignment and clearances are achieved. Refer to TECHNICAL SPECIFICATIONS .