LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Power Transfer Unit (Service Information)) >> Actuator, Shift >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the actuator on the PTU. Install and tighten the bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS 
  2. Connect the actuator wire harness connector.
  3. Install the right front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals