Sensor, Differential Pressure: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the 10 push pin fasteners (1) and the radiator closeout panel (2).
- Disconnect the differential pressure sensor wire harness connector (3).
- Remove the nut (4) and the retainer (5).
- Remove the two nuts (1) and the differential pressure sensor (2) from the bracket.
- Disconnect the differential pressure sensor hoses (6).
- If necessary, remove the differential pressure hoses from the tubes.
- If necessary, remove the belly pan. Refer to BELLY PAN, REMOVAL
.
- If necessary, remove the differential pressure tubes (2) from the catalytic converter (1).