LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2023 >> Renegade Red >> Repair and Diagnosis >> Engine Mechanical >> 1.3L Fuel System >> Fuel Injection >> Sensor, TMAP-Intake Manifold >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

  1. Install the intake manifold pressure and temperature sensor and securely tighten the retaining screw.
  2. Connect and lock the wire harness connector to the intake manifold pressure and temperature sensor.
  3. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  4. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals