October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ground Circuits
- Locate ECM behind center of instrument panel, in front of center console. Using a DVOM, check for continuity between ground and terminals No. 1 (Black/Yellow wire), No. 2 (Black/Red wire), No. 14 (Black/White wire) and No. 15 (Black/Red wire) at ECM C249 (26-pin) connector. See Fig 1
. If continuity does not exist at any terminal, repair open to ground in appropriate wire.
- Using a voltmeter, touch negative lead of voltmeter to a good ground. Touch positive lead of voltmeter to each ground terminal. With engine running, voltmeter should indicate less than one volt. If reading is one volt or more, check for open, corrosion and loose connection on ground lead.
Courtesy of KIA MOTORS AMERICA, INC.