LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2000 >> Sephia Base, Automatic >> Repair and Diagnosis >> Electrical >> Starters >> On-Vehicle Testing >> Transmission Range (Tr) Switch Test >> Sephia (A/T)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Sephia (A/T)

  1. Ensure starter operates with ignition switch in START position and transmission in Park or Neutral. Ensure back-up lights illuminate with ignition switch in ON position and transmission in Reverse. Ensure that position of gear selector lever and shift pattern indicator correspond. If starter does not operate or back-up lights do not illuminate, adjust switch. See TRANSMISSION RANGE (TR) SWITCH  under ADJUSTMENTS. If problem persists, go to next step.
  2. Disconnect negative battery cable. Remove battery, air cleaner assembly, and battery tray. Disconnect TR switch connector. Check continuity between TR switch terminals. See TRANSMISSION RANGE (TR) SWITCH CONTINUITY (SEPHIA)  table. See Figure. If continuity is not as specified, replace and adjust TR switch.
TRANSMISSION RANGE SWITCH CONTINUITY (SEPHIA)

Transmission Position Continuity Between Terminals No.
Park 1 & 2; 3 & 4
Reverse 3 & 5
Neutral 1 & 2; 3 & 6
Drive 3 & 7
2nd 3 & 8
1st 3 & 9
scientia non olet · About LEMON Manuals