Torque Specifications

Cylinder Head Bolt Tightening Sequence:

CYLINDER HEAD BOLT TIGHTENING SEQUENCE
Torque:
1st 36.1 ft. lbs. (49 Nm, 5 kg-m)







Loosen bolts in reverse of order shown.

Cylinder Head Bolt Tightening Sequence:

Retighten cylinder head bolts in order shown.


2nd 28.9 ft. lbs. (39.2 Nm, 4 kg-m) +90 +90

TENSIONER PULLEY LOCK BOLT
Torque 28 - 38 ft. lbs. (38 - 51 Nm, 3.9 - 5.2 kg-m)

CRANKSHAFT PULLEY
Torque 70 - 96 ft. lbs. (7.9 - 10.7 Nm, 0.8 - 1.1 kg-m)

CONNECTING ROD NUTS
Torque 34.7 - 36.9 ft. lbs. (47 - 50 Nm)





MAIN BEARING CAP BOLTS
Torque:
1st 28.9 ft. lbs. (39.2 Nm, 4kg-m)
2nd 14.5 ft. lbs. (19.6 Nm, 2kg-m) +90 +60

Fig. 23 Flywheel Tightening Sequence:

FLYWHEEL OR FLEXPLATE MOUNT BOLTS
Torque 71 - 75.9 ft. lbs. (97 - 103 Nm, 9.8 - 10.5 kg-m)

INTAKE MANIFOLD
Torque 13.7 - 18.8 ft. lbs. (18.6 - 25.5 Nm)





CAMSHAFT BEARING CAP BOLT TIGHTENING SEQUENCE
Torque 100 - 125 inch lbs.(11.3 - 14.2 Nm, 1.15 - 1.45 kg-m)

OIL PUMP
Torque 14 - 19 ft. lbs. (19 - 26 Nm, 1.9 - 2.6 kg-m)

EXHAUST MANIFOLD TO CYLINDER HEAD
Torque 28 - 34 ft. lbs. (38 - 46 Nm)

WATER PUMP
Torque 14 - 19 ft. lbs. (19 - 26 Nm, 1.9 - 2.6 kg-m)