Connector Identification

NOTE: Connector views outlined with double lines indicate male connector view. A single line outline indicates female connector view. See Fig 1-Fig 13 .

Fig 1: Identifying Canister Close Valve, Intake Air Temperature Sensor & Purge Solenoid Valve Connector Terminals

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Identifying Engine Coolant Temperature Sensor Connector Terminals

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Identifying Engine Control Module Connectors & Terminals (Optima & Magentis (Canadian) 2.5L)

Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Identifying Fuel Tank Unit Connector Terminal

Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Identifying Heated Oxygen Sensor Connector Terminals - Front & Rear

Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Identifying Idle Air Control Valve, Camshaft Position, Crankshaft Position, Throttle Position Sensor & Vehicle Speed Sensor Connector terminals