Diagnostic Tests: Notes
NOTE:
In some instances manufacturer has supplied one diagnostic procedure for multiple codes. In these cases, test components and circuits relevant to DTC retrieved.
NOTE:
For circuit identification, see WIRING DIAGRAMS article.
NOTE:
After all repairs, clear DTC. Verify repairs by driving vehicle with Hi-Scan Pro/Kia Data Pro. connected to OBD-II Data Link Connector (OBD-II DLC) and monitoring for pending codes.
NOTE:
In some instances a short to ground or a short to power may cause damage to control modules. Do not replace control modules until testing proves these conditions do not exist. Also verify that ground circuits have good continuity to ground.