Ignition Coil: Service and Repair

Removal
1. Disconnect battery cable.
2. Disconnect high-tension leads.
3. Disconnect ignition coil connectors.
4. Remove four ignition coil mounting bolts.
5. Remove ignition coils.

Installation
1. Position two coils above No.2 and No.4 spark plugs, and firmly push down to connect.
2. Insert and tighten four ignition coil mounting bolts.

Tightening torque: 14 - 19 lb.ft (19 - 25 N.m, 1.9 - 2.6 kg.m)

3. Reconnect ignition coil connectors.
4. Reattach high tension leads. Leads are marked for correct connection.




5. Reconnect battery cable.