Transmission Range Switch
- Ensure starter operates with ignition switch in START position and transmission in Park or Neutral. Ensure back-up lights illuminate with ignition switch in ON position and transmission in Reverse. Ensure that position of gear selector lever and shift pattern indicator correspond. If starter does not operate or back-up lights do not illuminate, adjust switch. See TRANSMISSION RANGE SWITCH under ADJUSTMENTS. If problem persists, go to next step.
- Disconnect negative battery cable. Remove battery, air cleaner assembly and battery tray. Disconnect TR switch connector. Check continuity between TR terminals. See TRANSMISSION RANGE SWITCH CONTINUITY table. See Figure . If continuity is not as specified, replace and adjust TR switch.
TRANSMISSION RANGE SWITCH CONTINUITY
| Transmission Position | Continuity Between Terminals No. |
|---|---|
| Park | 1 & 9; 5 & 6 |
| Reverse | 2 & 9 |
| Neutral | 5 & 6; 7 & 9 |
| Drive | 4 & 9 |
| 2 | 8 & 9 |
| 1 | 3 & 9 |