September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Leakage Test
- Remove injectors together with fuel rail.
- Secure injectors to fuel rail with wire.
Courtesy of KIA MOTORS AMERICA, INC.
- Connect data link connector terminals FUEL PUMP and B+ with jumper wire.
- Turn ignition switch ON.
- Tilt injectors about 60 degrees and verify that no fuel leaks from the injector nozzles.
- If fuel leaks, replace injector. Refer to REMOVAL
.
- Turn ignition switch OFF and remove jumper wire.