LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2003 >> Spectra LS, Automatic >> Repair and Diagnosis >> Electrical >> Starters >> Removal & Installation >> Starter >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation: Starter: Installation

  1. Place starter in engine.
  2. Insert lower starter bolt and tighten to specification. See TORQUE SPECIFICATIONS  . See Figure .
  3. Connect "B" terminal connector and tighten to specification. See TORQUE SPECIFICATIONS  .
  4. Connect "S" terminal connector. See Fig 1 .
  5. Position intake manifold support bracket.
  6. Insert three intake manifold support bracket bolts and tighten lower intake manifold support bracket bolt to specification. See TORQUE SPECIFICATIONS  .
  7. Position exhaust pipe and tighten bolts to specification. See TORQUE SPECIFICATIONS  . See Figure .
  8. Lower vehicle.
  9. Tighten two upper intake manifold support bracket bolts to specification. See TORQUE SPECIFICATIONS  .
  10. Install two starter bolts and tighten to specification. See TORQUE SPECIFICATIONS  . See Figure .
  11. Connect negative battery terminal.
Fig 1: Connecting Terminal Connector
G00306808Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Identifying Exhaust Pipe Bolts
G00306809Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals