LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2004 >> Amanti >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> Communication >> Immobilizer Lamp >> Global Rules For Status Led Pattern
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Global Rules For Status Led Pattern

  1. Lamp should be turned OFF, when IGN off, or when engine is running.
  2. Immobilizer lamp is on in case: IGN1 is ON and (TP identified correctly or Limp Home Password entered correctly)
    NOTE: In case BCM-EMS communication error, then Immobilizer lamp off after 2 seconds.
  3. Immobilizer lamp is blinking

    In case: (TP identification failed and Limp Home Password not running and Limp Home Password is not success) or (Limp Home Password entering failed and TP identification not running and TP identification not success)

    Except if (BCM virgin and TP identification failed), Then lamp is off

  4. During Limp Home Password entering sequence, the lamp reflects the IGN1 signal state: if IGN1 is ON, then lamp is ON, if IGN1 is OFF, then lamp is OFF
scientia non olet · About LEMON Manuals