LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2005 >> Rio L4-1.6L (JB) >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> System Specifications >> Sequences
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sequences

Main Bearing Cap
Install the main bearing cap bolts.

NOTE: The main bearing cap bolts are tightened in 2 progressive steps.
If any of the bearing cap bolts in broken or deformed, replace it.

Apply a light coat of engine oil on the threads and under the bearing cap bolts.
Install and uniformly tighten the 10 bearing cap bolts (A), in several passes, in the sequence shown.





Check that the crankshaft turns smoothly.
scientia non olet · About LEMON Manuals