Audio Assembly Replacement

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Remove the center facia panel (See REPLACEMENT ).
Loosen the screws.

Fig 1: Identifying Center Facia Panel And Screw
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A), then remove the audio assembly (B).

Fig 2: Identifying Connector And Audio Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connector are plugged in properly.