October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Circuit Inspection

IG "OFF".
Disconnect ECM/PCM harness connector.
IG "ON".
Measure the voltage between terminal 53/C01-1 (94/C01) of PCM (ECM) harness connector and ground.
Specification: B+
Is the measured voltage within specification ?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Check the bulb and repair as necessary.
- Repair Open or Short in control circuit and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.