Rear Defogger Relay: Testing and Inspection

REAR WINDOW DEFOGGER RELAY

INSPECTION
1. Disconnect the negative (-) battery terminal.
2. Remove the junction box.










3. Check for continuity between the terminals.
4. There should be continuity between the No. 1 in the I/P-D and No. 6 terminal in the I/P-M when power and ground are connected to the No. 10 terminal in the I/P-M and No. 6 terminal in the I/P-G.
5. There should be no continuity between the No. 1 terminal in the I/P-D and No. 6 terminal in the I/P-M when power is disconnected.