LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2006 >> Spectra5 2.0 1, Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) >> DTC P0196 Engine Oil Temp. Sensor Range / Performance >> Monitor DTC Status
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Monitor DTC Status

NOTE: If any codes relating to OTS are stored, do ALL REPAIRS associated with those codes before proceeding with further troubleshooting.
  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Press F5 (INFO) to select DTC information from the DTCs menu.
  3. Confirm that "DTC Readiness Flag" indicates "Complete". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions.
  4. Read "DTC Status" parameter.
    Fig 1: Scan Tool Display - DTC STATUS PARAMETER
    G04864279Courtesy of KIA MOTORS AMERICA, INC.
  5. Is parameter displayed "History (Not Present) fault"?
    NOTE:
    1. History (Not Present) fault: DTC occurred but has been cleared.
    2. Present fault: DTC is occurring at present time.

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for loose or poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals