Millimeter Wave Radar Sensor: Installation
WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
- Install the millimeter wave radar sensor with the 3 bolts.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- Connect the connector.
- Install the millimeter wave radar sensor with the 3 bolts.
- INSTALL FRONT BUMPER ASSEMBLY
- INSTALL COOL AIR INTAKE DUCT SEAL
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- ADJUST MILLIMETER WAVE RADAR SENSOR (See ADJUSTMENT )
- ADJUST FOG LIGHT AIM (See ADJUSTMENT )
- PERFORM INITIALIZATION NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).