Service Standard
WARNING: This page is about a different variant/trim than selected.
SERVICE STANDARD
| Items | Standard value [in(mm)] |
|---|---|
| Input shaft rear bearing end play | 0.00-0.0019L(0.00-0.05L) |
| Output shaft bearing end play (At 70kgf load) | 0.0019T-0.0039T(0.05T-0.10T) |
| Input shaft front bearing end play | 0.00-0.0019L(0.00-0.05L) |
| Differential bearing end play (At 70kgf load) | 0.0059T-0.0078T(0.15T-0.20T) |
| Differential pinion backlash | 0.001 L-0.0039L(0.025L-0.10L) |
| T: Indicate tightening of -(minus) direction of end play L: Indicate loosening of +(plus) direction of end play |
|