Input Shaft: Disassembly

Remove the snap ring (A) and washer (D) and remove the front ball bearing (B) and the rear ball bearing (C) using press.

Fig 1: Locating Snap Ring And Front Ball Bearing
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Locating Rear Ball Bearing And Washer
Courtesy of KIA MOTORS AMERICA, INC.
Remove the thrust washer (A) and spacer (B).

Fig 3: Locating Thrust Washer And Spacer
Courtesy of KIA MOTORS AMERICA, INC.
Remove the ring (A) and spacer (B).

Fig 4: Locating Ring And Spacer
Courtesy of KIA MOTORS AMERICA, INC.
Remove the 5th sleeve, 5th gear, 4th gear, 3 & 4th sleeve and 3rd gear all together using press.

Fig 5: Identifying 5th Sleeve, 5th Gear, 4th Gear, 3 & 4th Sleeve And 3rd Gear
Courtesy of KIA MOTORS AMERICA, INC.