LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System (F4A42) >> Output Speed Sensor >> Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Output Speed Sensor: Replacement

  1. Remove the battery and air cleaner, (see "TRANSAXLE RANGE SWITCH REPLACEMENT ")
  2. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor
    G05186511Courtesy of KIA MOTORS AMERICA, INC.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
  3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals