LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Rondo LX, 2.4 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle Control System (A5GF1)) >> Input Speed Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Input Speed Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the new O-ring to the input shaft speed sensor.
  2. Install the input shaft speed sensor.

    TORQUE:

    10-12 N.m (1.0-1.2 kgf.m, 7-8 lb-ft)

    CAUTION: While installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
  3. Check the connector for dust, dirt, or oil, and then connect the connector securely.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals