DTC P0716 Input Speed Sensor Range/Performance: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

DTC DETECTING CONDITION POSSIBLE CAUSE

Item	Detecting Condition	Possible cause
DTC Strategy	Speed rationality check	Signal circuit is open or short Sensor power circuit is open Sensor ground circuit is open Faulty INPUT SPEED SENSOR 1 Faulty TCM
Enable Conditions	Battery voltage > 10V Output speed > 200 RPM Engine speed > 700 RPM State of "TRANSMISSION" is "STATIC" The time after the last shift was finished 500msec
Threshold value	Input speed1 > 100 RPM
Diagnostic Time	More than 2sec
Fail Safe	"Input speed" is regarded as 600 RPM (Nt = 600 RPM) Shift prevention over 4th gear Prevention of manual shift Prevention of pressure adaptation