LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Interior) >> Crash Pad >> Replacement >> Audio Assembly Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Audio Assembly Replacement

WARNING: This page is about a different car, the 2008 Kia Optima and 2008 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the CENTER FASCIA PANEL .
  2. Loosen the screws.
  3. Disconnect the audio connector and antenna cable, then remove the audio assembly (A).
    Fig 1: Identifying Audio Assembly
    G04806103Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the cluster connector (A), then remove the audio assembly (B).
    Fig 2: Identifying Cluster Connector And Audio Assembly
    G04806104Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector are plugged in properly.