LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (SRS Control System) >> Front Impact Sensor (FIS) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Impact Sensor (FIS): Removal

WARNING: This page is about a different car, the 2008 Kia Optima and 2008 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least 3 minutes before beginning work.
  2. Remove the front bumper. Refer to FRONT BUMPER .
  3. Disconnect the Front Impact Sensor connector.
  4. Remove the Front Impact Sensor mounting bolt and sensor bracket cover.
    Fig 1: Locating Front Impact Sensor Mounting Bolt
    G04805704Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the Front Impact Sensor.
    Fig 2: Locating Front Impact Sensor
    G04805705Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals