October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
DTC P2270 O2 Sensor Signal Stuck Lean (Bank 1/Sensor 2): DTC Detecting Condition
DTC DETECTING CONDITION AND POSSIBLE CAUSE
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Plausibility check during shift of lambda set point to rich or lean
|
- Three Way Catalytic Converter (TWC)
- Air leakage in exhaust system
- Rear HO2S
|
| Enable Conditions |
- No fuel cut-off
- No full load phase
- No fuel trim error detected
- Delay time to start diagnosis: 13-30 sec., depending on operation point
- 11V < Battery voltage < 16V
- No relevant failure
|
| Threshold Value |
- Rear HO2S signal < 0.75V when lambda set point = 0.80
|
| Diagnostic Time |
|
| MIL On Condition |
|