September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC P0708 Transaxle Range Switch-Multi-Input: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition & Fail Safe |
Possible cause |
| DTC Strategy |
- Check for multiple signals
|
- Open or short in TRANSAXLE RANGE SWITCH
- Faulty TRANSAXLE RANGE SWITCH
- Faulty PCM
|
| Enable Conditions |
- Engine speed ≥ 500 RPM
- OUTPUT SPEED (PG-B) ≥ 0 RPM
|
| Threshold Value |
|
| Diagnostic Time |
|
| Fail Safe |
- Recognition as previous signal
- When signal is input "D" and "N" at the same time, PCM regards it as "N" RANGE.
- After PCM reset, if the if the PCM detects multiple signal or no signal, then it holds the 3rd gear position.
|