LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Rio5 LX, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Control System (From 11.19.2008) >> Back-Up Lamp Switch >> Repair Procedure >> Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedure: Replacement

  1. Disconnect the back up lamp switch connector.
    Fig 1: Identifying Back Up Lamp Switch Connector
    G06405679Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the back up lamp switch.
  3. Replace a new one and install the back up lamp switch, then connect the connector.

    Tightening torque:  30-35 N.m (3.0-3.5 kgf.m, 21.7-25.3 lb-ft)

scientia non olet · About LEMON Manuals