Driver Airbag (DAB) Module And Clock Spring: Removal

Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the airbag module mounting bolts (2EA).

Fig 1: Identifying Airbag Module Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the horn connector (A).
Release the connector locking pin, then disconnect the driver airbag module connector (B).
CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.

Fig 2: Identifying Horn Connector & Driver Airbag Module Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the steering wheel and steering wheel column cover. (Refer to STEERING COLUMN & SHAFT ).
Disconnect the clock spring and horn connector, then remove the clock spring.

Fig 3: Disconnecting Clock Spring & Horn Connector
Courtesy of KIA MOTORS AMERICA, INC.