Visual/Physical Inspection

Check immobilizer lamp circuit.
1. Ignition "ON" & Engine "OFF"
2. Check if immobilizer lamp operates properly.
  NOTE: Right after ignition "ON", Immobilizer lamp lights up for 30sec.
  If lamp blinks 5 times after ignition "ON", there's any fault in immobilizer system.
3. Is immobilizer lamp operates properly?
  YES
  
  Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
  
  NO
  
  Go to "COMPONENT INSPECTION " procedure