Monitor SCANTOOL Data

1. Connect scantool to Data Link Connector(DLC).
2. IGN "ON" & Engine "OFF"
3. Monitor the "KEY STATUS, SMARTRA STATUS and ECU STATUS" Parameter on the Scantool.

   Specification : 'LEARNT'

   Fig 1: View Of Current Data Display

   Courtesy of KIA MOTORS AMERICA, INC.

   Fig.1) This data show that 3 keys have been taught, ECU has been learned, Key in key cylinder has been learned and SMARTRA3 has been learned.

4. Has the "SMARTRA" status been learned?

YES 

Keep "KEY ON" status for 1 hours to withdraw "Locked by Timer" status. Then register transponder and go to "Verification of Vehicle Repair" procedure.

NO 

Go to next procedure.