Timing Chain: Installation

Tightening torque 

7.84 ~ 9.80 Nm (0.8 ~ 1.0 kgf.m, 5.78 ~ 7.23 lb-ft)

Fig 1: Identifying Water Pump Pulley

Courtesy of KIA MOTORS AMERICA, INC.

Tightening torque 

81.4 ~ 85.3 Nm (8.3 ~ 8.7 kgf.m, 60.0 ~ 62.9 lb-ft)

29.4 ~ 33.3 Nm (3.0 ~ 3.4 kgf.m, 21.7 ~ 24.6 lb-ft)

Fig 2: Identifying Drive Belt Auto Tensioner

Courtesy of KIA MOTORS AMERICA, INC.

Tightening torque 

52.92 ~ 57.82 Nm (5.4 ~ 5.9 kgf.m, 39.06 ~ 42.67 lb-ft)

Fig 3: Identifying Drive Belt Idler

Courtesy of KIA MOTORS AMERICA, INC.

Crankshaft pulley → A/C pulley → idler pulley → alternator pulley → water pump pulley → P/S pump pulley → tensioner pulley.

Rotate auto tensioner arm in the counter - clockwise moving auto tensioner pulley bolt with wrench.

After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly.

Fig 4: Engine Drive Belt Routing Diagram

Courtesy of KIA MOTORS AMERICA, INC.