LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Spectra5 2.0 2, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (A4CF2) >> Automatic Transaxle Control System >> Input Speed Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Input Speed Sensor: Installation

  1. Install the new O-ring to the input shaft speed sensor.
  2. Install the input shaft speed sensor.

    TORQUE: 10-12 N.m (100-120 kgf.cm, 7-8 lb.ft)

    CAUTION: While Installing the Input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
  3. Check the connector for dust, dirt, or oil, and then connect the connector securely.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals