Service Standard
ITEM SPECIFICATION
| Item | Specification [mm (inch)] |
|---|---|
| Input shaft end play | 0.7 ~ 1.45 (0.0276 ~ 0.0571) |
| Low and reverse brake pressure plate end play | 1.65 ~ 2.11 (0.0650 ~ 0.0831) |
| Reduction plate snap ring end play | 0 ~ 0.16 (0 ~ 0.0063) |
| 2ND brake pressure plate end play | 1.09 ~ 1.55 (0.0429 ~ 0.0610) |
| Under drive sun gear end play | 0.25 ~ 0.45 (0.0098 ~ 0.0177) |
| Differential bearing spacer end play | 0.045 ~ 0.105 (0.0018 ~ 0.0041) |
| Under drive clutch snap ring end play | 1.6 ~ 1.8 (0.0630 ~ 0.0709) |
| Direct clutch reaction plate snap ring end play | 0.6 ~ 0.8 (0.0236 ~ 0.0315) |
| Reverse clutch snap ring end play | 0 ~ 0.09 (0 ~ 0.0035) |
| Over drive clutch snap ring end play | 0 ~ 1.2 (0.0394 ~ 0.0472) |
| Reverse clutch reaction plate snap ring end play | 1.5 ~ 1.7 (0.0591 ~ 0.0669) |