LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Rondo EX, 2.7 6 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System -- A5GF1 >> Output Speed Sensor >> Repair procedures (A5GF1) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair procedures (A5GF1): Installation

  1. Install the new O-ring to the output shaft speed sensor.
  2. Install the output shaft speed sensor.

    TORQUE:

    10~12 N.m (1.0~1.2 kgf.m, 7~8 lb-ft)

    CAUTION: While installing the output shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
  3. Check the connector for dust, dirt, or oil, then connect the connector securely.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals