LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Block >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

CAUTION:
  • Use fender covers to avoid damaging painted surfaces.
  • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
  • Mark all wiring and hoses to avoid misconnection.
  • Inspection the timing belt before removing the cylinder head.
  • Turn the crankshaft pulley so that the No. 1 piston is at top dead center.
  • Engine removal is required for this procedure.
  1. Remove exhaust manifold.
  2. Remove intake manifold.
  3. Remove timing chain.
  4. Remove water temperature control assembly.
  5. Remove cylinder head.
  6. Remove oil pump.
  7. Remove oil filter assembly.
  8. Remove A/C compressor (A) from engine.
    Fig 1: Identifying A/C Compressor
    G06837813Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove generator (A) from engine.
    Fig 2: Identifying Generator
    G06837814Courtesy of KIA MOTORS AMERICA, INC.
  10. Remove power steering pump (A) from engine.
    Fig 3: Identifying Power Steering Pump
    G06837815Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals