LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Module >> Driver Airbag (DAB) Module and Clock Spring >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Disconnect the battery negative cable and wait at least three minutes before beginning work.
  2. Remove the airbag module mounting bolts.
    Fig 1: Locating Airbag Module Mounting Bolts
    G06838327
  3. Disconnect the horn connector (A).
    Fig 2: Disconnecting Horn Connector
    G06838328
  4. Release the connector locking pin (B), then disconnect the driver airbag module connector (C).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
  5. Remove the steering wheel and steering wheel column cover. .
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 3: Identifying Clock Spring And Horn Connector
    G06838329
scientia non olet · About LEMON Manuals