Variant Coding Procedure
- On-Line Type On GDS
- Ignition "OFF", connect scantool.
- Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
- Select Variant coding mode.
- Follow steps on the screen as follows:
- Initial ACU Variant Coding screen
- VIN Code entering screen
- Variant coding's proceeding screen-1
- Variant coding's proceeding screen-2
- Variant coding is completed
NOTE:- Screen of Retrying the Variant coding after finishing variant coding
- Screen of communication failure
- Off-Line Type On GDS (this can be used when not connecting to Internet)
- Initial ACU Variant Coding screen
- ACU CODING Code entering screen
- Screen of rechecking ACU CODING code's entering
- Variant coding's proceeding screen-1
- Variant coding's proceeding screen-2
- Variant coding is completed