LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Soul Base >> Repair and Diagnosis >> Restraints >> Seat Belts >> SRS Control Module >> Front Impact Sensor (FIS) >> Repair procedures >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair procedures: Installation

CAUTION:
  • Do not turn the ignition switch ON and do not contact the battery cable while replacing the front impact sensor.
  1. Install the new Front Impact Sensor.
  2. Tighten the Front Impact Sensor mounting bolt.

    Tightening torque: 

    7.8 ~ 9.8 Nm (0.8 ~ 1.0 kgf.m, 5.7 ~ 7.3 lb.ft)

  3. Connect the Front Impact Sensor connector.
  4. Reconnect the battery negative cable.
  5. After installing the Front Impact Sensor, confirm proper system operation:
    1. Turn the ignition switch ON. The SRS indicator light should be illuminated for about six seconds and then turn off.
scientia non olet · About LEMON Manuals