LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2011 >> Rio LX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transaxle Control System) >> Back-up Lamp Switch >> Repair procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the back up lamp switch connector.
    Fig 1: Identifying Back Up Lamp Switch Connector
    G06831923Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the back up lamp switch.
  3. Replace a new one and install the back up lamp switch, then connect the connector.

    Tightening torque : 

    30~35 Nm (3.0~3.5 kgf.m, 21.7~25.3 lb-ft)

scientia non olet · About LEMON Manuals