Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the center console cover (A).
- Remove the center console. (refer to CONSOLE )
- Disconnect the connector (A).
- Remove the cotter pin (A) from the shift cable.
- Remove the shift cable holder.
- Remove the shift lock cable (A).
- Remove the shift lock cable mounting nut (B).
- Remove the shift lever assembly by removing the bolts (4 ea).
- Remove the retainer (A) and nuts (B).
- Remove the shift cable assembly from the transaxle. (refer to REMOVAL )
- Remove the shift cable assembly.