Description And Operation: Description
All modules are linked a low speed CAN network.
The input information for the modules is coming from both the CAN network and the hardware components (actuators and sensors).
- Front Area Module (FAM)
- Headlamp low/high beam control (with DRL)
- Park lamp control
- Front fog lamp control
- Front turn signal lamp control
- Windshield wiper control
- Windshield deicer
- Diagnostics
- In-Panel Module (IPM)
- Remote Keyless Control (RKE)
- Voice Alarm System (VAS)
- Ignition key hole illumination
- Switch indicators control
- Panel light control
- Seat belt warning
- Auto light/DRL control (Logic)
- Windshield/Rear wiper control (Logic)
- Turn and Hazard lamp control (Logic)
- Central door lock (Logic)
- Windshield deicer timer
- Rear glass defog timer
- Gateway for ISO-9141 (K-Line)
- Rear Area Module (RAM)
- Tail lamp control
- Turn and Hazard lamp control
- Back up lamp control
- Rear fog lamp control
- Stop lamp outage detection
- Sliding door power window/Quarter glass control
- Room lamp control
- Rear wiper control
- Rear glass defog
- Fuel filler door open solenoid control
- Assist Drive Module (ADM)
- Driver Drive Module (DDM)